DL5.0C is designed for residential and small commercial applications, with up to 50 units in parallel and an energy range from 5.12 kWh to 256 kWh. It supports 1C discharge rate. With high cycle times and a long lifespan, it ensures worry-free electricity consumption.
Battery System Usage and Operation Instructions
After completing the electrical installation, follow these steps to start the battery system. Refer to P7 DIP Switch Description to prepare the battery module before starting up, then press the ON/OFF button to the ON position, press and hold the SW button for 3 seconds.
After the indicator self-test, the RUN indicator will light and the SOC indicator will be on
When protection mode is activated or system failure occurred, the alarm signal will be
given through the working status indicator on the front panel of the DL5.0C. The network
management can query the specific alarm categories.
If the fault such as single cell over voltage, charging over-current, under-voltage
protection, high-temp protection and other abnormalities which affects the output,
please deal with it according to
The Dyness Smart APP is easy to manage your energy storage system anytime, anywhere.
You will experience:
User-friendly interface
Real-time data
Convenient operation at your fingertips
The battery supports:
for inverter and system communication.
The battery provides:
The system supports up to 50 batteries in parallel, allowing storage expansion up to 256kWh.
The DL5.0C supports:
for flexible system design.
Yes. The battery supports an optional WiFi module for remote monitoring and management.